<ins id="bl9fj"></ins>
<var id="bl9fj"><noframes id="bl9fj">
<i id="bl9fj"></i><var id="bl9fj"></var>
歡迎訪問恒安機械網站
咨詢熱線:18653160053
新聞資訊 news
聯系我們 CONTACT

地址:濟南市槐蔭區美里路麗水華庭

電話:18653160053

QQ:850206910

新聞資訊 您當前的位置:首頁 - 新聞資訊 >

GMP車間凈化公司:恒溫恒濕實驗室裝修要點

來源:http://www.lzfqp13.top │ 發表時間:2019-06-28 

  恒溫恒濕室廣泛應用于棉紡、毛紡、化纖、紙張、包裝、煙草生產企業以及質檢、纖檢等部門。在裝修的過程中要按照規程嚴格操作,恒溫恒濕室內裝修要遵循以下要點。
  The constant temperature and humidity room is widely used in cotton spinning, wool spinning, chemical fibre, paper, packaging, tobacco production enterprises, quality inspection, fiber inspection and other departments. In the process of decoration, strict operation should be carried out in accordance with the regulations, and indoor decoration with constant temperature and humidity should follow the following points.
  恒溫恒濕室設計和研究工作室的室內凈高:當不設置空氣調節時,不宜低于2.80m;設置空氣調節時,不應低于2.40m。專用恒溫恒濕室的室內凈高應按實驗儀器設備尺寸、安裝及檢修的要求確定。走道凈高不應低于2.20m。
  The indoor net height of the design and research room of constant temperature and humidity is not less than 2.80M when air conditioning is not set, and 2.40M when air conditioning is set. The indoor net height of the special constant temperature and humidity room should be determined according to the requirements of the size, installation and maintenance of the experimental equipment. The net height of the corridor should not be less than 2.20m.
  GMP車間凈化公司:恒溫恒濕實驗室裝修要點
  GMP Workshop Purification Company: Key Points of Constant Temperature and Humidity Laboratory Decoration
  一、恒溫恒濕室裝修要點
  Main points of decoration of constant temperature and humidity room
  1.實驗用房、走道的地面及樓梯面層,應堅實耐磨、防水防滑、不起塵、不積塵;墻面應光潔、無眩光、防潮、不起塵、不積塵;頂棚應光潔、無眩光、不起塵、不積塵。
  1. The ground and staircase floors of laboratory rooms and corridors should be solid and wear-resistant, waterproof and skid-proof, dust-proof and dust-free; the walls should be clean, glare-free, moisture-proof, dust-proof and dust-free; and the roofs should be clean, glare-free, dust-proof and dust-free.
  2.使用強酸、強堿的實驗室地面應具有耐酸、堿腐蝕的性能;用水量較多的實驗室地面應設地漏。
  2. The laboratory ground with strong acid and alkali should be acid-resistant and alkali-resistant, and the laboratory ground with more water consumption should be equipped with ground leakage.
  3.需要定期清洗、消毒或防塵要求高的實驗室,其地面、墻面和頂棚應做整體式防水飾面。墻面與墻面之間,墻面與地面之間、墻面與頂棚之間宜做成半徑不小于0.05m的半圓角。室內應減少突出的建筑構配件及明露管道,同樣的,白鐵通風工程設計時也應盡量減少室內不必要的突出物,力求簡潔美觀。
  3. Laboratories requiring regular cleaning, disinfection or dustproof should have integral waterproof finishes on their floors, walls and roofs. Between the wall and the wall, between the wall and the ground, between the wall and the ceiling should be made into a semi-circle radius of not less than 0.05m. The prominent building components and exposed pipes should be reduced in the interior. Similarly, the unnecessary prominent objects in the interior should be minimized in the design of white iron ventilation engineering, in order to be concise and beautiful.
  4.恒溫恒濕室不宜設吊頂。
  4. Suspended ceiling is not suitable for constant temperature and humidity room.
  5.需設吊頂且無嚴格密封要求的空間,宜采用活動板塊式吊頂。
  5. The movable plate ceiling should be used if there is no space required for strict sealing.
  GMP車間凈化公司:恒溫恒濕實驗室裝修要點
GMP車間凈化公司
  GMP Workshop Purification Company: Key Points of Constant Temperature and Humidity Laboratory Decoration
  二、恒溫恒濕室工程安裝維護結構和裝飾要求
  II. Installation and maintenance structure and decoration requirements of constant temperature and humidity chamber project
  1、恒溫恒濕室的主實驗室應該自成一區,安排在實驗室的靠邊角落處。用密封門限制人員的進出,把有潔凈要求的房間設置在人員干擾少的地方,把輔助房間設置在外部??紤]微生物試驗操作流程,把檢測室與洗刷消毒室和培養室相鄰,方便人流與物流的分離。為控制人員的出入(人流),只設有一個密封門進入微生物實驗室主潔凈區,操作人員進入物流走廊然后進入準備間,并從準備間分別經過一更、緩沖進入操作區;經過更衣、風淋、緩沖進入局部百級環境實驗室。物流則由六個傳遞窗實現。
  1. The main laboratory of the constant temperature and humidity chamber should have its own area and be arranged in the corner near the laboratory. Sealed doors are used to restrict people's entry and exit, and rooms with cleanliness requirements are set in places where personnel interference is less, and auxiliary rooms are set outside. Considering the microbial test operation process, the test room is adjacent to the washing and disinfection room and the culture room, which facilitates the separation of flow and logistics. In order to control the entry and exit of personnel (flow of people), only one sealed door enters the main clean area of microbiological laboratory. Operators enter the logistics corridor and then enter the preparation room. They enter the operation area through one change and buffer respectively from the preparation room. After changing clothes, air shower and buffer, they enter the local 100-level environmental laboratory. Logistics is realized by six transfer windows.
  2、恒溫恒濕室整個平面規劃徹底可以滿足國家關聯標準及試驗室運用的需求,充分利用了空間,依照試驗操作流程裝備了各種功用的房間,操作線路方便快捷。
  2. The whole plan of the constant temperature and humidity room can completely meet the requirements of the relevant national standards and laboratory application, make full use of the space, equip the rooms with various functions according to the test operation process, and the operation line is convenient and fast.
  3、恒溫恒濕室主題框架為彩鋼板玻璃間隔,色彩為啞白色。此外,冷藏冷庫工程安裝時隔板也多數采用彩鋼板,但與恒溫恒濕室規格不盡相同,恒溫恒濕室間隔一般玻璃厚度為8MM,為避免堆積塵埃,窗料運用R25MM鋁合金圓弧壓線;一切二維銜接處的內側均運用R50MM鋁合金內圓角,露出在外的二維銜接線的外側則用R100MM鋁合金外角銜接;彩鋼板的三維銜接處運用三維接點過度,而彩鋼板與墻角地上則用鋁合金槽銜接。吊頂資料亦為彩鋼板。微生物檢測室地上為環氧樹脂資料,具有無縫隙、耐腐蝕、平坦、簡單清潔的特征。地上地腳線用陰角鋁材裝潢,漂亮且嚴密性好。整個恒溫恒濕室經過科學描繪,精心施工,使試驗室內構成鞏固、無縫、滑潤、漂亮、不反光、不積塵、不生銹、防潮、抗菌、功能優秀的無菌外表和內殼。
  3. The theme frame of constant temperature and humidity room is stained steel plate and glass spacer, and the color is dumb white. In addition, color steel plates are mostly used in the installation of cold storage projects, but the specifications are different from those of constant temperature and humidity chambers. The thickness of glass in constant temperature and humidity chambers is 8MM. In order to avoid dust accumulation, R25MM aluminium alloy arc pressing line is used for window materials; R50MM aluminium alloy inner corner is used in all two-dimensional joints to expose outside. The outer side of the two-dimensional connection is connected with the outer corner of R100MM aluminium alloy; the three-dimensional connection of the color steel plate is excessively used, while the color steel plate is connected with the aluminium alloy groove on the corner floor. The ceiling information is also coloured steel plate. The microbial testing room is made of epoxy resin, which is seamless, corrosion-resistant, flat, simple and clean. The ground and ground baselines are decorated with shade aluminium, which is beautiful and compact. The whole constant temperature and humidity room is scientifically depicted and carefully constructed to make the laboratory a solid, seamless, smooth, beautiful, non-reflective, dust-free, rust-free, moisture-proof, anti-bacterial and functional aseptic outer and inner shell.
  以上是GMP車間凈化公司為大家整理的相關內容,想要了解更多,歡迎訪問我們網站:http://www.lzfqp13.top
  The above is the related content of GMP workshop purification company for you. For more information, please visit our website: http://www.lzfqp13.top.

上一篇:山東無塵車間必須用臭氧消毒滅菌嗎?
下一篇:手術室凈化層流罩應該怎樣選擇呢

魯公網安備 37010502001103號

策略赢配资被骗
<ins id="bl9fj"></ins>
<var id="bl9fj"><noframes id="bl9fj">
<i id="bl9fj"></i><var id="bl9fj"></var>