<ins id="bl9fj"></ins>
<var id="bl9fj"><noframes id="bl9fj">
<i id="bl9fj"></i><var id="bl9fj"></var>
歡迎訪問恒安機械網站
咨詢熱線:18653160053
新聞資訊 news
聯系我們 CONTACT

地址:濟南市槐蔭區美里路麗水華庭

電話:18653160053

QQ:850206910

新聞資訊 您當前的位置:首頁 - 新聞資訊 >

GMP車間凈化公司如何防止顆粒污染

來源:http://www.lzfqp13.top │ 發表時間:2019-07-05 

  GMP車間凈化公司對潔凈度有非常嚴格的要求,不允許出現顆粒。全面防止顆粒污染是保證車間清潔的重要措施。在這里,GMP車間凈化公司詳細解釋了顆粒產生的原因以及如何預防。
  GMP workshop purification company has very strict requirements on cleanliness, and no particles are allowed. Comprehensive prevention of particle pollution is an important measure to ensure the cleanliness of workshop. Here, GMP Workshop Purification Company explains in detail the causes of particle formation and how to prevent it.
  一、GMP凈化車間生產顆粒原因:
  1. Reasons for granule production in GMP purification workshop:
  外部通道:GMP凈化車間不可能完全封閉。因此,隨著人員和物料的進出,以及車間內外空氣的流動,許多外部顆粒被帶入無塵車間,導致車間充滿顆粒。
  External access: GMP purification workshop can not be completely closed. Therefore, with the entry and exit of personnel and materials, as well as the flow of air inside and outside the workshop, many external particles are brought into the dust-free workshop, resulting in the workshop full of particles.
  內部生產:GMP凈化車間的機器和設備運行時,機器與地面之間的摩擦也會產生顆粒,機器內部部件之間的摩擦也會產生顆粒。
  Internal production: When the machine and equipment in GMP purification workshop are running, the friction between the machine and the ground will also produce particles, and the friction between the internal parts of the machine will also produce particles.
GMP車間凈化公司
  防止顆粒污染應遵循以下三條基本原則:
  The following three basic principles should be followed to prevent particulate pollution:
  不進入,運營商、機器和零部件在車間前應清洗處理,進入無塵車間灰塵在更衣室穿不發,不產生靜電導電纖維材料特殊的無塵服裝、帽子、鞋子、手套、口罩,等等,通過空氣淋浴時可以刪除附著在衣服上使用清潔空氣粒子的表面,可以進入車間!
  Without entering, operators, machines and components should be cleaned before entering the workshop. Dust in the dustless workshop can not be worn in the dressing room. No special dust-free clothing, hats, shoes, gloves, masks with electrostatic conductive fiber materials can be produced. Surface of clean air particles attached to clothes can be removed by air shower. Enter the workshop!
  不要做:灰塵是物體運動時摩擦和接觸剝離產生的,粒子是物體運動時產生的。所以在車間應盡量使用磨損和粉塵小的材料,使用粉塵小的潤滑油等措施!
  Don't do it: Dust is produced by friction and contact peeling when an object is moving, and particles are produced when an object is moving. So in the workshop should try to use wear and dust small materials, use dust small lubricants and other measures!
  無儲存:根據車間內部情況及時調整凈化設備,清除產生的顆粒和粉塵,保持車間清潔達標!
  No storage: According to the internal situation of the workshop, timely adjust the purification equipment, remove the generated particles and dust, and keep the workshop clean up to the standard!
  以上是關于GMP車間凈化公司顆粒污染防治的相關信息。我希望今天的分享對你有所幫助。如果您有更多的問題或需要,可以訪問我們的官方網站http://www.lzfqp13.top咨詢。
  The above information is about the prevention and control of particle pollution in GMP workshop purification company. I hope today's sharing will help you. If you have more questions or needs, you can visit our official website http://www.lzfqp13.top for consultation.

上一篇:山東無塵車間對電子行業范疇的奉獻
下一篇:層流手術室凈化設計設備

魯公網安備 37010502001103號

策略赢配资被骗
<ins id="bl9fj"></ins>
<var id="bl9fj"><noframes id="bl9fj">
<i id="bl9fj"></i><var id="bl9fj"></var>